Hacker News: tecleandor

New comment by tecleandor in "Scrcpy v4.0"

tecleandor — Wed, 13 May 2026 08:36:01 +0000

s/new/never/ ? :)

New comment by tecleandor in "Bambu Lab is abusing the open source social contract"

tecleandor — Tue, 12 May 2026 16:37:55 +0000

I've been told about the Snapmaker U1, but I haven't tested it. More expensive than a Bambu but cheaper than a Prusa (I think)

New comment by tecleandor in "Claude Platform on AWS"

tecleandor — Tue, 12 May 2026 14:59:09 +0000

Something like that, but if your boss went too high in your commitment contract, it's nice to have different options to put there...

New comment by tecleandor in "I hate soldering"

tecleandor — Tue, 12 May 2026 09:09:16 +0000

How well does the pump work? A couple times I've had to desolder a connector or IC with lots of pins from a PCB and it's a painful process. I've always wanted to buy one of those, but I've seen lots of reports about getting clogged easily.

I rarely desolder, but I can easily justify a hundred bucks if I can avoid all that hours of work, where I'm also risking damaging an IC, lifting a pad, or something else...

New comment by tecleandor in "Claude Platform on AWS"

tecleandor — Tue, 12 May 2026 08:41:24 +0000

Also you can spend your commitment contracts :p

New comment by tecleandor in "Bliss (Photograph)"

tecleandor — Mon, 11 May 2026 11:04:50 +0000

Microsoft bought all the right and even the original physical film (that I guess they would scan to get the best image possible). So I guess then Microsoft would be on it too.

New comment by tecleandor in "Chevrolet Performance eCrate package (400v/200hp)"

tecleandor — Thu, 07 May 2026 09:02:51 +0000

It says:

"The current eCrate kit requires a GM 4-speed automatic transmission with an external mode switch (e.g., 4L60, 4L65, 4L70, 4L75 Transmissions). This helps to make the eCrate conversion easier for vehicles that already have a conventional driveline, plus it provides extra torque in lower gears and extra speed with overdrive. We are working on bringing a direct drive variant option to our eCrate portfolio."

New comment by tecleandor in "Diskless Linux boot using ZFS, iSCSI and PXE"

tecleandor — Thu, 07 May 2026 08:59:50 +0000

I don't know if I'm understanding your question, but ZFS actively corrects data on disk when it finds a checksum error [0]. Those checksum errors can be found when accessing that data, or doing a 'scrub' action that scans the whole volume to check integrity.

  0: https://klarasystems.com/articles/troubleshooting-zfs-common-issues-how-to-fix-them/

New comment by tecleandor in "The first photo published in a newspaper, in 1848 (2023)"

tecleandor — Tue, 05 May 2026 16:15:16 +0000

Wikipedia says [0] it's rue Saint-Maur-Popincourt, and from this article [1] it says it was taken from 92 Rue du Faubourg du Temple. Going there with Google Street Maps and rotating to look to rue Saint-Maur, seems feasible.

  0: https://es.wikipedia.org/wiki/Archivo:Barricades_rue_Saint-Maur._Avant_l%27attaque,_25_juin_1848._Apr%C3%A8s_l%E2%80%99attaque,_26_juin_1848.jpg
  1: https://www.unjourdeplusaparis.com/paris-reportage/premiere-photo-barricade-histoire

New comment by tecleandor in "Let's Buy Spirit Air"

tecleandor — Tue, 05 May 2026 11:23:30 +0000

We've had terrorists attacks on trains around here, and the only theater we have is a super quick xray scan of our baggage.

New comment by tecleandor in "Let's Buy Spirit Air"

tecleandor — Mon, 04 May 2026 15:33:38 +0000

In Spain, a similar length high speed train route would be Madrid-Barcelona, that's 400miles and takes 2h 30min.

If you offer me the same price for flying than for taking the high speed train, I'll take the train every time.

In practice it'll take less travel time, no security lines or theater (no problem bringing your water bottle or whatever), you can bring more luggage, you can stand up/walk/visit the bar during the trip, you go from city center to city center so you don't have to spend an extra in taxis... I just arrive there 20-30 minutes before the train leaves and that's all.

New comment by tecleandor in "Tindie store under "scheduled maintenance" for days"

tecleandor — Wed, 29 Apr 2026 08:59:35 +0000

And yet, banks do it all the time, even daily.

And I very well remember when Rackspace took down their object storage for weeks in their London zone, because they ran out of hard drives.

New comment by tecleandor in "Tindie store under "scheduled maintenance" for days"

tecleandor — Wed, 29 Apr 2026 08:57:18 +0000

Where are you selling from now?

New comment by tecleandor in "Back Up and Running"

tecleandor — Wed, 29 Apr 2026 08:47:41 +0000

Yeah, I just read the email, and I don't remember if they ever sent another announcing they were going to be acquired. It's surprising to me. But I've could have missed it, of course.

New comment by tecleandor in "GitHub Actions is the weakest link"

tecleandor — Tue, 28 Apr 2026 18:47:20 +0000

Thanks! I'll take a look :)

New comment by tecleandor in "GitHub Actions is the weakest link"

tecleandor — Tue, 28 Apr 2026 17:31:03 +0000

Is it Renovator or Renovate? I'm trying to find it to check it out...

New comment by tecleandor in "AISLE Discovers 38 CVEs in OpenEMR Healthcare Software"

tecleandor — Tue, 28 Apr 2026 17:22:53 +0000

Well, it's not popular maybe on bigger hospitals, but back in the day I think it was relatively popular on smaller practices even on the US. I don't know if it has lost traction (or not) with the popularization of cloud services, I'm not super up to date...

New comment by tecleandor in "Why has there been so little progress on Alzheimer's disease?"

tecleandor — Sun, 26 Apr 2026 09:46:17 +0000

> Which illnesses have been cured? Diabetes, cancer?

Chicken pox, polio, hepatitis C, dracunculiasis, yaws, malaria (on the way of it), tuberculosis, syphilis, everything that can be killed with antibiotics, rubella...

New comment by tecleandor in "1-Bit Hokusai's "The Great Wave" (2023)"

tecleandor — Sat, 25 Apr 2026 14:17:49 +0000

Sorry for the "actually", but Hentai didn't exist yet as a genre. It was "shunga", that is, erotic "ukiyo-e", a popular style at that time.

Popular shunga works by Hokusai are "Two lovers" or the wrongly translated "The Dream of the Fisherman's Wife" (the original Japanese title is "female diver and octopus")

New comment by tecleandor in "DaVinci Resolve – Photo"

tecleandor — Tue, 14 Apr 2026 11:16:25 +0000

What are you doing with Photomechanic since the price raise, change to subscriptions, and deprecation of the Plus version? Are you using an old version or have you moved to the subscriptions?