For the last 4 years I've been using it full time as I changed technologies and moved to a Python/Vue shop. I initially used vanilla python-mode, then elpy, and now I'm currently using LSP for Python development. Everything is setup well, I just write code, commit using Magit, and create Github PRs using Magit/Forge. For major refactors, I do fall back on using PyCharm.

For Vue I just Web-mode because I haven't found LSP to provide me anything useful (maybe code jumping, but nothing else). Maybe it has better integration with TypeScript? I'm not too sure.

My emacs setup is pretty standardized with a dotfile. I use Projectile to jump between projects, and use Eyebrowse to assign each project its own window (I usually have anything from 2-5 open at a time). The pattern I've found useful is to have the same number assigned for Eyebrowse workspace and terminal, so `Alt+n` opens my nth project in terminal and in emacs.

For the features/tickets that I'm working on, I use an org file to note down my thoughts, subtasks, blockers, and also the status (TODO/DONE/IN-PROGRESS) etc. It's synced with my org's Google Drive, while the rest of my personal org files get synced to iCloud. Any topics for 1-1 with my peers/managers also get noted and synced.

There was a time in my previous job where I was using emails for discussions, and back then I had tight integration with Mu4e too. I've dabbled with Jira/Slack modes but they're not worth the hassle.

I'm the only one using Emacs in my org, and I feel fine doing it. Pairing works fine since the driver uses their editor of choice.

But probably because ttrss's pretty nice with quite a few plugins, so I can mold it based on what interests me. For example, I am also self hosting wallabag, and there's a single key shortcut to export the stuff from ttrss over to wallabag. Then there's a plugin to pull the data from the source websites and change it using XPaths. I use that to pull down the entire content instead of a single paragraph summaries, and to pull down the actual comics that I'm reading instead of the descriptions that are being sent to the readers. (As an aside, I donate/fund the makers in whatever capacity I have so that it compensates with me not getting their ads).

Did you know that even Youtube, HN & Reddit host their updates via RSS feeds? I have Youtube feeds for some of the channels that I find interesting, so that I can watch the stuff whenever it becomes available. For some low volume subreddits, you can use that as well.

With elfeed running in Emacs, I had bound a single key to download the youtube video via youtube-dl into my archive folder. I miss that stuff with ttrss, but I guess there would be some plugin somewhere to do that.

For podcasts (since these are also technically feeds) I use AntennaPod[3] on my Android phone, but don't use it too often because of all the time commitment required with podcasts.

[1]: https://tt-rss.org/ [2]: https://github.com/skeeto/elfeed [3]: https://antennapod.org/

Actually this is something I wanted to do last year but didn't get enough motivation/energy to actually pursue it. Now I've forced myself to actually do stuff with Rust for the first quarter of 2019 and have made some progress. If things go as per my timelines, I'll focus on Elixir & Rust in alternate quarters. I've found this to be much better than tackling both in parallel which I was doing last year.

As an aside, in the last month of 2018 I dabbled with Pharo/Smalltalk just to investigate its highly dynamic nature, improvement to dev productivity & how things really were supposed to work in real OOP. It was very impressive, especially considering we had something like in 80s & 90s.

Comments URL: https://news.ycombinator.com/item?id=18985449

Points: 28

# Comments: 6

Once you get the hang of it, the second one gives a gentle introduction to the entire process of capturing, refiling and prioritising.

http://doc.norang.ca/org-mode.html

http://www.newartisans.com/2007/08/using-org-mode-as-a-day-p...

Also, this one on quickly capturing anything from the browser:

https://orgmode.org/manual/Protocols.html#Protocols

One of the patterns listed is called "Create Feedback Loops" which states that one of the best ways to not get stuck with whatever wrong you're doing is to create feedback loops which provide objective data about your performance and allow you to fail early & fast, without wasting your time stuck with bad practices and implementations.

While coding, this can be something like TDD. At a higher level, this can be pair programming, code reviews, finding mentors, etc.

I wanted to know if any HN users have created their own personal feedback loops. How has it helped you in progressing in your careers and saved you from following the wrong path?

Comments URL: https://news.ycombinator.com/item?id=18724129

Points: 1

# Comments: 0

This website tells the truth when it says that following the deep work ritual is a pain. I've read the book and wholeheartedly agree with whatever Cal Newport says, but so far planning my day has been the most difficult thing to do, especially when I have to update it after the planning derails. I keep jumping between planning my on my computer using org-mode or planning it on paper. So far, nothing has stuck.

I'll give this website shot for some time.

1. Wake up 1.5hr earlier than my family. This gives me around 1.15hrs of solid focused time.

The downside is, of course, I have to sleep around 10 so the family time takes a hit. I have to leave early from office to compensate and if there's something that holds me back in office then there's a high chance this plan derails. I try my best to juggle work, self-time and family time and while it's not impossible, it sometimes becomes difficult. Last one week, for example, was such where I had a lot of issues at work, and fixing them and reaching home would mean I'll be back around 9.30PM and I had absolutely no interest in rising early.

2. Reach office an hour or so early and try to focus. I say try because there are things which are out of my control, especially the traffic. If there's bad traffic then reaching office and getting into a focused mode takes a lot of time.

Evenings I've tried working but this isn't consistent. Sometimes when the office is empty and most of my office work is done, I might get some time for focused work but this is pretty impossible to get. By the time I reach home, I have to swim through a lot of traffic so there's hardly any mental cycles left that I can spend on focused work.

Additionally, I would say that it works best when your focused time is same everyday. For me, that has been waking up early.

- I use i3 inside XFCE. This allows me to use the xfce launcher, status bar, tray icons and other goodies, e.g. adding external monitor pops open the display properties, volume bar is available anytime. All this saves me from binding buttons & doing other changes in my i3 config.

- Since Win+{1,2,...0} (buttons which change workspaces in i3) are now hardwired in my brain, I have arranged the icons on the taskbar of my Windows-10 machine to what I have in i3.

Win+1 is assigned to Emacs on i3, so that's the first icon on my windows taskbar.

Win+2 -> shell/git bash

Win+3 -> Thunar/Windows Explorer

Win+4 -> Firefox/Firefox

Win+7 -> Anki/Anki

This saves a lot of brain cycles, as my Windows workflow is also a bit like what I usually use on Debian.

Last week I try using EXWM but wasn't able to make it work as per my expectations, so switched back to i3, but EXWM is definitely a TODO on my list.

Anyhow, some time ago I came across a blog post where the author wrote some elisp just to copy the stuff from clipboard, save it, link it to the buffer. I don't have the link handy, but maybe this SO answer might help you:

https://stackoverflow.com/questions/17435995/paste-an-image-...

Some years ago I had Samsung S2 where unlocking the bootloader was an offline activity. I don't remember how but doing that was quick and easy. Now I own a MotoG4 where unlocking means going to some website, entering my email address and then receiving unlock code in my email. If Motorola knows my email address, or can link the (supposedly unique) unlock code to my phone, what's stopping them from voiding my warranty?

I have a hunch that newer versions of some mainstream phones do not allow unlocking the bootloader, and this is going to become more and more common.

I know of two tools which might help.

One that I use is more Emacs oriented. My personal setup uses mu4e[1], fetches emails using mbsync, indexes the emails using mu and allows you to run queries based on date/time/subject/content etc. You can quickly search, mark, delete and archive emails.

The other option would be to use a similar combination of notmuch, offlineimap and mutt[2]. I have used mutt but with the online services (i.e. without downloading my emails locally), so I am not sure how that will work. But mutt also support similar tagging and searching and running operations on selected emails.

Caveat: Make sure you have enough understanding with what you do with these tools, they also have the capacity to delete all your emails on cloud. Perhaps run the queries on some test emails first.

[1]http://www.djcbsoftware.nl/code/mu/mu4e/

[2]stevelosh.com/blog/2012/10/the-homely-mutt/

This old laptop is what I would go to whenever I was between laptops. It's a C2D, 4GB RAM. I installed debian with i3 and it was good enough for browsing internet, to do random coding stuff, reading PDFs, watching movies (although it would run hot). Also I played a lot of Roller Coaster Tycoon[1] on it. Man, I love RCT!! I just might plug in an SSD in it during the next windfall.

[1]: https://github.com/OpenRCT2/OpenRCT2

Given that any email address that's given out quickly becomes a target for spammers, does it makes sense to actually give out the custom email address? I assume that the answer is going to be yes. In such situation, what are the precautions that you guys take to reduce the amount of spam you get? What are some of the example places where you give out your custom email address?

My assumption is that having a custom domain gives one the independence of changing providers, and each provider will reduce spam to a different degree.

Comments URL: https://news.ycombinator.com/item?id=18127521

Points: 1

# Comments: 0

I frequently find myself in the second situation and only a handful of times have I been in the first situation.

Now incremental reading for me is a multi-monitor and multipass approach. One monitor has Anki, the other has the thing I'm reading. I keep on reading and keep noting down questions.

I've also come to realise that the context is totally different when I frame a question during reading, and when I revisit the same question later. A lot of times I have to clean-up the question: perhaps add a little more context, change wording etc. so it becomes a bit easier to answer.

I am one of those guys who try moving everything to Emacs, but personally I found Anki to be much better than org-drill just for the simple reason that I can go through the cards quickly using the phone app when I have some time (waiting for someone, something, etc.). With org-drill I have to be in front of my machine.

But yeah, I've pretty much sold to org-mode. I, too, have been creating a knowledge base inside org-mode. This contains the deeper knowledge and explanations, while the tidbits are in Anki. Org mode notes are like fat nodes, and Anki cards are the threads which bind them. I personally have found both to be very useful together.

[1]: https://github.com/louietan/anki-editor